登錄后自動綁定微信號
[official car application and mobile phone order dispatch app logic]
The car user fills in the car order on the applet and app, including who uses the car, their contact information, car start time, car end time, starting point, destination, who uses the car, the number of people on this trip and the type of car applied for.
After the user submits the application, the office director app receives the approval notice synchronously. If you approve the official vehicle, click agree. If you have any instructions, you can write them together; If it is not approved, it can be rejected and the reason shall be filled in.
No matter whether the operation is refused or agreed, the vehicle can see the results and comments synchronously. If you pass the application, you can see the dispatch status of the fleet dispatcher.
After receiving the dispatch notice, the fleet dispatcher app clicks whether to agree, and then starts to dispatch vehicles; If you disagree, you need to state the reasons.
When dispatching, the system will automatically match the vehicles in the application model that are idle during the use period. After selection, the system will prompt whether the vehicle is equipped with a full-time driver and further prompt whether the driver is idle. If it is idle, the driver can be assigned; If you can‘t travel on business, you can choose another driver driving this model.
If there are no idle vehicles in the application period, the system will display other models of the fleet. For example, the user applies for a car. At this time, other available vehicles can be selected from the types of off-road vehicles, commercial vehicles and even medium buses to meet the needs of the user.
After the dispatcher sends the car, the applicant, the actual user, the driver and the office director will receive this information simultaneously.
The super administrator of the official car application and mobile phone order distribution app can see the detailed data on the management end, such as the time when the driver receives the order, the time and coordinates of the point where he goes to use the car before departure, the time and coordinates of the person who uses the car, the time and coordinates of the person who uses the car to reach the destination, the mileage, the system recording during driving, the time and coordinates when the driver ends the order, the time and coordinates when the driver restarts the order, the driver‘s reimbursement bill, the reimbursement approver and so on.
Super administrator terminal includes: 1. Order dispatching vehicle management, 2. Order dispatching driver management, 3. Order recording and playback,
4. Order driving path playback, 5. Vehicle scheduling management, 6. Unit management, 7. Department management, 8. Department management, 9. Department vehicle budget management, 10. User points management, 11. Driver audit management, 12. Driver reimbursement management, 13. Driver line raising approval management, 14. User ticket shortage management, 15 Invitation management, 16. Invitation rebate management, 17. Reconciliation management, 18. Statistics management, 19. Complaint management, 20. Suggestion management, 21. Evaluation management module, 22. Driver service sub management, 23. System setting and other 31 functions.
Official vehicle application and mobile phone order dispatch app vehicle dispatcher workbench includes: user registration, application for vehicle use, selection of vehicle, selection of vehicle use deadline, filling in the reason for vehicle use, selection of vehicle, selection of vehicle parked in the unit, selection of vehicle parked outside the unit, selection of whether to bring a full-time driver, evaluation, online only payment, complaint, cancellation of order, two-dimensional horse sweeping, horse opening, remote car locking, remote unlocking, remote car locking and flameout, Approve the order, fill in the approval reasons, cancel the order, select the vehicle, select the driver, replace the vehicle, replace the driver, and end the order in advance.
The office director‘s worktable includes: fill in the destination, select the start time of vehicle use, select the end time of vehicle use, fill in the reason of vehicle use, select the vehicle, select the vehicle parked in the unit, select the vehicle parked outside the unit, select whether to bring a full-time driver, evaluation, online only payment, complaint, cancellation of order, two-dimensional horse sweeping, horse opening, remote locking, remote unlocking, remote starting and remote stopping, 38 functions, such as remote locking and flameout, approving orders and filling in approval reasons.
contact us : 790878215@qq.com
tel: (+86)13521104099
鄭州新能源公務車企業用車線上派車公務車調度微信小程序派車軟件 【主要功能】 我們研發的公務車用車派車軟件,在擁有同行開發的公務用車軟件基本功能上,特意增加以下特色功能: 公務車的司機,在開車的過程中,難免會遇到過橋、上高速、加油、洗車、加機油等各種臨時開銷。 出差回來報銷的時候,時間一長,或是換洗衣服時票據丟失,那就麻煩了。 所以,在公務用車派車軟件的司機端,很有必要增加報銷一功能,不論是因為什么的消費,只要是合理范圍內的,均可以在結束行程后進行報銷,報銷的方式比較簡單,在首頁找到已完成的行程,在行程里分別添加費用名稱、費用金額、拍照上傳票據即可。 財務人員根據報銷憑證進行報銷,既減輕了司機墊付資金的負擔,也降低了時間一長就搞亂的風險。
出租車小程序順風車小程序手機APP打車軟件源碼 【順風車小程序手機APP打車軟件】 (1)在順風車乘客下單呼叫順風車的前三分鐘內,系統會反復幾次向附近的司機發送此訂單信息,系統默認首次發送半徑為3公里內的司機,如果該半徑內無司機,系統自動擴大半徑公里數后再次向該范圍內的司機發送訂單通知;如果該此次仍然沒有符合條件的司機,系統會第三次擴大半徑公里數并向該范圍內的司機發送訂單通知。如果仍然沒有符合條件的司機,系統則會等待一定時間后再次從3公里開始發送訂單; (2)如果當時有順風車司機嗆單,乘客端則會提示該訂單已經被嗆,在乘客端的我發的訂單里,能看到成功嗆單的順風車司機的車-牌-號,點擊查看詳情,可以看到該司機的詳細信息,如果認可,點擊支付按鈕,支付此次行程費用;支付方式可以使用微不信、支付寶、積分、余額進行全額支付,也可以使用優惠券進行部分抵扣支付。使用任何一種其余的支付方式支付成功后,司機端都會收到叮咚的提示音。 如果乘客臨時有事需要取消該訂單,則直接點擊取消即可;
注塑機印刷機訂書機械組合機床PLC聯網大數據升級 將傳統產業的注塑機、印刷機、訂書機械、組合機床的PLC進行聯網大數據升級后,可實現收集多機群和自動化流水線中每個環節的數據,比如連續變化的量,如溫度、壓力、流量、液位和速度,即時與數據庫里的數據進行校驗和比對,一旦出現偏差較大時,及時通知管理員,管理員可以選擇忽略,也可以選擇停止生產降低進一步的損失。
萊蕪鋼鐵區電話下單電召出租車APp軟件源碼 已經開發出的出租車電召軟件的乘客端的功能如下: 一、電話叫出租車、一鍵下單叫出租車、語音叫出租車、選擇目的地叫出租車、替人叫出租車、預約叫出租車、乘客充值。 二、優惠券發放與使用。 六、下單前可見附近有多少出租車空車。 七、下單后可見通知了多少出租車司機,有多少人嗆單、多少人拒絕。 八、下單后3分鐘內重復呼叫多次出租車司機。
網約車APP打車軟件內置高德地圖;代駕用戶呼叫代駕司機時,先選擇出發地和目的地,再計算出路程公里數、所需時間以及全程費用;代駕司機接單后導航到出發點跟乘客溝通完畢啟動汽車,點擊確認并開始出發;